Disclaimer: This website is for informational purposes only. Always check the actual product label in your possession for the most accurate ingredient information due to product changes or upgrades that may not yet be reflected on our web site. These statements made in this website have not been evaluated by the Food and Drug Administration. The products offered are not intended to diagnose, treat, cure, or prevent any disease. If you believe that you may have a disease condition, please consult your healthcare practitioner immediately, and before using any dietary supplement product.
Pitcher Replacement Filter
FREE from BISPHENOL-A Phthalates & PVC
Replacement filter for the Ecoflo Family Water Pitcher - The replacement
filter contains a filter pack assembly, cover and flushing module.
BEFORE USE: With clean hands, remove the water pitcher assembly from the
outside package. Remove the water pitcher, cover, reservoir and filter pack
assembly from the inside of the pitcher hand. Wash the lid, pitcher and
reservoir with warm water using a mild detergent. Do NOT wash in the dishwasher.
Do NOT wash filter pack.
IT IS NECESSARY TO WET-OUT THE FILTER PACK BEFORE USE!
There is a black rubber bulb (A) attached to a red flushing lid (B) screwed onto
the top of the filter pack (C). This is called the filter pack/flushing
assembly. The red lid should be hand tightened on top of the filter pack. Do NOT
Attach the filter pack/flushing assembly to a water faucet (D). It might be
necessary to hold the rubber bulb with one hand and use the other hand to open
the water faucet valve. Do NOT use hot water as it will soften the rubber bulb,
and it might detach itself from the faucet. Only a light water flow is necessary
– so open the water faucet very slowly. Flush the filter pack with water for
about 2 minutes.
Turn off the water and detach the flushing assembly from the faucet.
Unscrew the red flushing lid from the filter pack. Save the flushing assembly to
re-wet the filter when the unit has not been used for a long period of time.
Make sure that the gasket (F) is in place on top of the filter pack. Insert and
screw the filter pack to the bottom of the reservoir (E) and tighten until
firmly sealed. Do NOT over tighten! Insert the reservoir into the pitcher and
replace the cover.
The Ecoflo water pitcher is now ready for use!